Good Shine Elma Goa

  • GreenZ Affiliated Detailer
  • GYEON Certified Detailer
  • GYEON Detailer

3Pedals Detailing is a GYEON Certified and allowed to use entire range of GYEON ceramic coatings including their certified range of coatings.

The services available with them are as follows:

  • Premium Auto Detailing Service
  • Ceramic Coating
  • Graphene Coating
  • Sealant Coating
  • PPF & Wraps
  • Headlights Restoration
  • Exterior and Interior Detailing
  • Polishing & Waxing
  • Car & Bike Foam wash

Contact: Mr. Elly +91 99214 75880
Opp Duler Football Ground, Mapusa, Goa


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

We follow GreenZ 4 Stage process in our auto detailing as follows:

GreenZ 4 Stage Process

Cleaning & Decontamination Stage

WHEELS & TIRES: The wheels, tires and the inner arch of the fender are thoroughly cleaned using GreenZ Wheel Cleaner & GreenZ APC with  recommended detailing brushes for effective cleaning.

The wheels & tire cleaning also includes decontamination of brake dust, iron deposit & tar using specific cleaners like Gyeon Q2M IRON and Gyeon Q2M TAR which are body safe and not only cleans but also restores the lost look. This process ensures your ride’s wheels are free from any iron contamination and break-dust, presence of which otherwise can corrode and damage the alloy wheels.

SALT & MINERAL DEPOSIT REMOVAL, LOGO CLEANING: All the dirt, salt and mineral deposits are removed from the body, especially from the logo using special chemicals GreenZ MDR & special brushes.

CAR WASH: The body is thoroughly washed using PH-neutral shampoo like GreenZ Foam Shampoo that’s safe on paints and coating, and will be dried using the GreenZ Supreme Drying Towel which will ensure no further streaks are induced on the paint surface.

TAR DECONTAMINATION: Vehicles usually collect large amounts of tar and asphalt contamination during daily use, these tar spots will be removed using Gyeon Q2M TAR.

CLAYING: After washing the car thoroughly to get rid of the surface contaminants, it will be later clayed using Gyeon Q2M Clay to remove any further contaminants that are bonded with the paint and were not able to get removed by washing.

After this process, car will be completely free from any contaminants & dirt.

Correction Stage

We use our own compounds, polishes and pads which are manufactured in Germany to correct the paint surface. We use GreenZ XtremeCut Compound 350 with GreenZ Denim Pad to remove orange peel and deep scratches. To remove  Severe scratches, we use GreenZ XtremeCut Compound 350 along with our GreenZ Compressed Hybrid Wool Pad 6.5″ or GreenZ Hybrid Green Xtreme Cutting Foam Pad or GreenZ Hybrid White Heavy Cutting Foam Pad depending on the nature of paint and paint defect.

Then use GreenZ Heavy Cut Compound 600 with our GreenZ Hybrid White Heavy Cutting Foam Pad or GreenZ Hybrid Orange Medium Cutting Foam Pad to remove swirls and minor and medium scratches.


Finally use our GreenZ Ultra Finish Polish 4500 and GreenZ Hybrid Black Finishing Foam Pad on a DA polisher which will bring mirror finish for the paint surface.

Unlike our competitions, the excellent combination of our compounds and pads enable us to use two-step correction in most of the situations and save a lots of clear coat on our customers cars.

Protection Stage

We follow the car detailing process suggested by the respective manufacturers strictly & religiously when it comes with paint protection to get the best out of their paint protection products.

PREPPING: After multiple steps of polishing are performed, it calls for a need of surgical-clean of the paint surface before any kind of protection is performed. The body will be wiped down with Gyeon Q2M PREP for proper vehicle preparation before any protection application to the paint surface.

This serves two purposes, it degreases the paint surface and removes the polish residue and the oil presented in the polishes, it also gives anti-static property, so the dust particles won’t settle on the surface and makes the surface oil-free and dust-free for a perfect coating. This process is very important as a coating requires a clean and bare paint surface to do a perfect chemical bonding.

INTERIOR PROTECTION: Car’s dashboard will be protected using GYEON Q²M Preserve and fabric seats can be protected using GYEON Q² Fabric Coat and leather seats using GYEON Q² Leather Shield.

PAINT PROTECTION: After Prepping the paint would be protected with the ceramic coating and wiped using suede microfiber cloth. Multiple layers will be added based on the chosen package.

GLASS PROTECTION: Car’s glasses can be protected using GYEON Q² VIEW.

TIRE DRESSING: The cleaned tires are dressed with water-based dresser which restores the shine and safeguards the rubber from cracking.

Also, choose our Tyre coating – Gyeon Q2 TIRE which can last 3 – 4 months as an add-on service if you want more durability and protection for the tyres.

EXTERIOR PLASTICS CLEANED & DRESSED: The exterior plastics are cleaned using specific plastic cleaners and later dressed with water based dresser which restores the shine and safeguards the plastic from UV rays.

We have plastic restoration product – Gyeon Q2 TRIM, which can restore the faded-plastic and protect it for more than 12 months as an add-on service.

CHROME & METAL SURFACES CLEANED AND POLISHED: All the chrome and metal surfaces are treated with metal polish like Wenol to clean and restore the gloss.

Car’s metal parts such as wheels, bike engine in bike detailing process and exhaust pipes etc using Gyeon Q2 RIM

Maintenance Stage

We not only offer the best possible protection to our customers, but help them to safe guard their investment by offering the best maintenance.

We use GYEON Q²M Bathe+ for maintenance wash & GYEON Q²M Bathe as regular wash. Use GYEON Q² CANCOAT EVO and GYEON Q²M Cure for maintenance treatment.


We also use GYEON Q²M WETCOAT as maintenance product for our ceramic coated vehicles.